Xtreamer Prodigy Media Player driver for Windows 7 - Xtreamer Prodigy Media Player driver from Xtreame

Xtreamer Prodigy Media Player 4.2.7

Xtreamer Prodigy Media Player driver from Xtreamer for OS Independent

Xtreamer Prodigy Media Player driver from Xtreamer for OS Independent

Publisher review for Xtreamer Prodigy Media Player 4.2.7:

Before install Xtreamer Prodigy Media Player 4.2.7you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Xtreamer Prodigy Media Player . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Xtreamer Prodigy Media Player Firmware version 4.2.7.New features:- Press REC remote key to go directly into DVB-T from the Main Screen 
Fixes:- Background music stops when pressing HOME key - FIXED
- 16:9 screen ratio - FIXED
- Network Shares requesting a password on access - FIXED 
- Wget command - FIXED
- Alsa binary files - FIXED
- No audio for Android games - FIXED
- MAC address - FIXED
- USB Slave connection detection - FIXED
Before starting the firmware installation process, please note the following:- Use a USB2 thumb/pen-drive that in known to function with your Xtreamer media player. We recommend one no bigger than 2GB.
- Format the thumb/pen-drive to the FAT-32 file format system.
- Some HDMI display devices may not display an on-screen image (due to HDCP protocols). If so, please connect using the 'yellow' RCA/phono cables.
- Disconnect all external USB Wi-Fi dongles, USB hubs and USB HDD drives.
- Remove your internal HDD (if fitted).
- Disconnect RF antenna from the internal DVB-T module (if fitted).
Installation steps:1. Un-zip/Extract the Emergency xxxxxxxx.zip file. This will reveal an install.img file.
2. Copy the install.img file to the root of the USB2 thumb/pen-drive (ie: not inside a folder).
3. Insert the thumb/pen-drive into one of the rear USB ports.
4. Disconnect the power from the Xtreamer media player and wait for 30 seconds. Press the power button on the front of the Xtreamer media player and keep it pressed. Re-connect the power to the Xtreamer media player with the power button still pressed. After a few seconds the emergency upgrade process should be visible on your display device (if the procedure has been performed correctly). Now you can release the power button.
5. After the "Emergency Recovery" installation procedure has finished, the Xtreamer media player should automatically perform a RESTORE DEFAULT (which will remove all your saved pre-sets). However, it is highly recommended that you also manually perform a mandatory RESTORE DEFAULT to complete the firmware installation.

Operating system:
OS Independent